Last Updated: November 8, 2026
Quick Summary
Building code updates can change what a project must do long after design has started, so the best approach is to confirm the applicable National Construction Code edition and referenced Australian Standards early, then check the design against them before approval. This review checks that the committed design still meets the rules in force at the time of approval.
- Check both the NCC edition and the current version of each referenced Australian Standard before relying on either.
- Confirm the applicable edition with your certifier at the start of design to avoid costly retrofits later.
- Updated requirements do not always apply to existing buildings; scope of work and transitional provisions decide this.
- Deemed-to-satisfy solutions suit buildings that fit prescriptive rules, while performance solutions suit unusual or non-standard designs.
- Use a fire safety compliance checklist to confirm code edition, standards, evidence and sign-off before submission.
Table of Contents
- What Building Code Updates Change for Your Project
- Understanding the Building Code of Australia and Its Referenced Standards
- How Updated Requirements Apply to Existing Buildings
- Building Code Compliance Documentation: What Certifiers Need to See
- Deemed-to-Satisfy Versus Performance Solutions
- The Fire Safety Design Compliance Assessment Process
- Using a Fire Safety Compliance Checklist for Buildings
- Booking a Compliance Review for Your Next Project
- Frequently Asked Questions
Building code updates can change what your project must do long after design work has started, and that is where most compliance problems begin. In Australia, the National Construction Code (NCC) sets the baseline, and the Building Code of Australia (BCA) sits within it as the volume that governs most building work. FyreWise, a team of chartered and RPEQ-accredited fire engineers, works through these changes on projects, so the guidance below reflects the questions that certifiers and developers commonly raise.
A compliance review for updated requirements is not a box-ticking exercise. It is a check on whether the design you have already committed to still meets the rules in force at the time of approval. Each step below follows that logic.
What Building Code Updates Change for Your Project
A code update can alter prescriptive provisions, referenced Australian Standards, or the way performance requirements are interpreted. Any one of these can shift the fire safety strategy for a building, even when the architecture has not changed. The practical question is which edition applies to your application and whether transitional arrangements apply.
Recent research on code interpretation points to the same difficulty. Interpreting building regulations is difficult because rule text is rarely unambiguous, so two competent readers can reach different conclusions about the same clause.
Understanding the Building Code of Australia and Its Referenced Standards
The BCA works by reference. Many of its requirements point to Australian Standards, and those standards are updated on their own schedule. A project can therefore be affected by a change to a standard that the NCC itself never touched. Check both the NCC edition and the current version of each referenced standard before you rely on either.
Confirm the applicable edition with your certifier at the start of design. Retrofitting a compliance strategy after the edition changes is far more expensive than confirming it early.
How Updated Requirements Apply to Existing Buildings
Updated requirements do not always apply to buildings that already exist. Whether they do depends on the scope of work, the type of building and the transitional provisions in force. Alterations, change-of-use applications and upgrades to fire safety systems can each trigger a different assessment.
For existing buildings, a fire safety compliance assessment looks at what is present, what is required under the current rules, and where the gap sits. Early identification of that gap usually leaves more options open than discovering it during inspection.
Building Code Compliance Documentation: What Certifiers Need to See
Certifiers assess evidence, not intent. Documentation that supports a building code compliance claim should show the applicable provision, the proposed solution, and how that solution has been verified. Step-by-step guidance on documentation and approval covers what to include before submission.
A useful test is whether a reviewer can trace each design decision back to a specific clause without asking you for clarification. If they cannot, the documentation is not finished.
Deemed-to-Satisfy Versus Performance Solutions
The NCC offers two routes to compliance. A deemed-to-satisfy (DTS) solution follows prescribed provisions directly. A performance solution demonstrates that the building meets the performance requirements by an alternative means (What you need to know). Neither route is inherently cheaper or safer; the right choice depends on the design.
DTS is usually faster where the building fits the prescriptive rules cleanly. Performance-based design earns its place when the building is unusual, the layout is non-standard, or strict adherence to DTS would compromise the design intent. The step-by-step guide to performance-based fire engineering sets out how that process runs.
When a Performance Solution Is the Right Choice
A performance solution is worth considering when a building departs from what the prescriptive provisions were written for. Large atria, complex egress arrangements and mixed-use buildings are common examples. The trade-off is a more involved evidence process, so it is best scoped early.
Performance solutions must be justified against the performance requirements, and that justification needs to be accepted by the certifier. To compare the two routes for your own project, see performance solution versus deemed-to-satisfy.
The Fire Safety Design Compliance Assessment Process
A structured assessment usually runs in four stages: confirm the applicable code and standards, define the fire safety strategy, verify the strategy through analysis or testing, and document the outcome for approval. Each stage feeds the next, so an error in an early stage carries forward.

Where a design relies on numerical modelling, such as smoke movement or evacuation timing, the assumptions and inputs need to be stated clearly. Complex numerical modelling shows how real fire scenarios are simulated to test these assumptions.
Using a Fire Safety Compliance Checklist for Buildings
A checklist will not replace engineering judgement, but it prevents the omissions that cause delays. Use it to confirm the code edition, the referenced standards, the fire safety measures, the evidence supporting each measure, and the sign-off requirements before submission.
Review the checklist against the most recent version of the applicable provisions. A checklist built from an earlier edition can pass a design that no longer complies.
Booking a Compliance Review for Your Next Project
If your project is affected by a recent code update, a compliance review is the fastest way to find out where you stand. To discuss your project, send an enquiry and our chartered engineers will respond with next steps.
Frequently Asked Questions
How do I check whether a building complies with current fire safety requirements?
Start by identifying the classification of the building under the National Construction Code, then compare its existing fire safety systems against the requirements that apply to that classification. Review the building’s approved plans, the annual fire safety statement and any previous certification records. Where the building was approved under an earlier edition of the Building Code of Australia, a fire engineer or building surveyor can assess whether the current requirements apply to changed or altered parts. A formal compliance assessment documents the findings and any gaps that need action.
What Australian building regulations apply to fire safety design?
The main framework is the National Construction Code, which includes the Building Code of Australia. Volume One covers Class 2 to 9 buildings and Volume Two covers houses and small residential buildings. Fire safety provisions reference Australian Standards that cover matters such as detection, hydrant installations and maintenance of fire protection systems. State and territory variations may also apply, so confirm the requirements with the relevant building authority for your project location.
What is the difference between a Deemed-to-Satisfy solution and a Performance Solution?
A Deemed-to-Satisfy solution follows the prescriptive provisions of the Building Code of Australia directly, meaning the building is designed to match specified measures such as set distances, fire-rated materials and sprinkler requirements. A Performance Solution instead demonstrates that the building meets the Performance Requirements of the Code through alternative means, usually supported by engineering analysis such as evacuation modelling or fire spread calculations. Performance Solutions suit complex or innovative designs, but they require a documented assessment that the certifier must accept.
What documents are needed for a fire safety compliance assessment?
Typically you will need the current architectural drawings, the building classification, the existing fire safety schedule, the annual fire safety statement, previous building approvals and any Performance Solution reports. For a Performance Solution, the assessment also needs the design fire scenarios, the assumptions used and the evacuation analysis. Having complete and current documentation at the outset reduces delays, because incomplete reports are a common reason certifiers request further information.
How often should a building’s fire safety compliance be reviewed?
Fire safety systems must be inspected and maintained at intervals set by the relevant Australian Standards, and an annual fire safety statement is required for most buildings with essential fire safety measures. A full compliance review is also advisable whenever the building is altered, changes use or is affected by a significant update to the Building Code of Australia. Building owners should keep records of each review so they can demonstrate compliance during audits or when selling or refinancing.
Who is responsible for keeping a building compliant with fire safety requirements?
The building owner carries ongoing responsibility for maintaining essential fire safety measures and issuing the annual fire safety statement. Designers, builders and certifiers carry responsibility for compliance at the time of design, construction and approval. Facility managers often coordinate inspections and maintenance contracts on the owner’s behalf. Clear allocation of these responsibilities in the project documentation helps avoid gaps when a building changes hands or management.
What should a fire safety compliance action plan include?
A practical action plan lists each identified non-compliance, the required corrective measure, the responsible party, the priority and a target completion date. It should reference the specific Building Code of Australia clause or Australian Standard that applies to each item, and note whether the fix is a maintenance task, a modification or a Performance Solution. Recording the sign-off for each completed action creates a documented trail for certifiers and building owners.



